buffer host

From ppooll
(Redirected from Buffer host)
Jump to navigationJump to search

Buffer host.jpg

This is where you store your buffers (soundfiles) for lloopp.

buffer_host accepts the following file types: aiff, sd2f, wave, nxts. mpegs (mp3) and mooov (quicktime) will be imported as aiff-files (does not save RAM). any other files will be loaded with a (second) file-dialogue, and will be noisy.

There are several ways to fill the buffers:

~ doubleclick in the purple (selected) line of the list labeled with "new" to load a soundfile into a buffer.

~doubleclick in the purple (selected) line that holds a soundfile-name to replace a soundfile.

~drag&drop a soundfile onto the list, this will read the file into the selected buffer.

~drag&drop a folder containing soundfiles onto the list, all soundfiles will be loaded.

~define soundfolder(s) containing your soundfiles to load soundfiles without dialogue: ((needs picture example))

~you may press clear at first to clear old or alien settings.

~press "f" in buffer_host and select a folder containing soundfiles. (repeat for more folders)

~ or (!!!), press "ff" and select a folder containing folders of soundfiles.

~the folder(s)-name will be selectable in the upper menu; the soundfile's name will be listed in the menu below after you selected a folder..

~these settings will be automatically stored (in lloopp.presets/filepathLLOOPP). make sure now and forever, that there is only one file called "filepathLLOOPP" on your harddisc.

~the dark-blue menu will get filled with the soundfiles in the folder specified by the menu above.

~there are a few lloopp-example samples, fill the menu with these pressing "||"


~ once you loaded some soundfiles, you may choose "write" from the presets_menu. this will save the soundbank.

the waveform-display will show an overview of the selected soundfile (left channel only, if it's a stereo-file). the button "n" left of it can be used to normalize a soundfile (affects RAM only).

~the size of the selected soundfile will be displayed in ms in the numberbox at the bottom. the number of channels in indicated with the bold number.

the misc-menu:

~choosing "view" on a selected soundfile, will open the buffer-window. no use of that except clicking and draging in the soundfile will show the position in ms in the bottom numberbox.

~choosing "clear-selected" from the menu on a selected soundfile, will clear this soundfile (this will free max memory, but do not save banks with buffers called buffer-#).

~choosing "write" from the menu on a selected soundfile, will write this soundfile to disc. useful if you recored into a buffer etc.

~choosing "clearall" from this menu will clear all buffers.

~when loading a bank that contains fewer buffers than currently loaded and "delete-the-rest" is active, all old buffers will be deleted, if "keep-the-rest" is active, old buffers outside the bank's range will be kept.

~choosing "subpatches" will open to the guts of buffer_host.

act by filipino@klingt.org