A very cheap & basic sample-player. It's 4 times the same module.
At the top right corner you have the "update-end" key. If toggled, the end-position will be set to the sample length when a buffer is selected.
parameters from left to right:
~speed (1 is original, -1 is backwards)
~start position of loop in milliseconds.
~end position of loop in milliseconds.
Underneath these (from left to right:
Load the buffer to play (loaded in buffer_host).
Toggle to route the output to the addressed location in the blue menus.
Blue menus: act menu/ parmenuL/ parmenuR (defaults to ho_st when not toggled).